Email: sales@electricaltest.com.cn, sales@electricaltest.cn
Tel: +862081600059,18011959092
QQ : 2355822502, 2355822508
Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
News&Successful Cases
2015-10-22
How to use stability test apparatus?
Place the test sample on the center of the bench surface as required by the clauses of the standards. Manually rotate the bench surface and hold the speed within 1PRM.
1.If the test sample is equipped with an input jack socket, install a proper connector and flexible cord. Place the test sample on the stability bench surface by any normal position while in use, when the dip angle of the stability test bench is 10°.
2. If the test sample is an apparatus installed with a door, do this test by the status of opening or close of the door and take the adverse situation;
3.if the test sample is an apparatus with an electrical heating element, repeat this test when the angle of inclination is 15°;
and in the case of a lightweight test sample which is apt to fall over during the test, lay a skid proof rubber pad on the stability test bench surface before placing the test sample on it for test.
The appliance shall not overturn.
The appliance stability tester ZLT-WD manufactured by Zhilitong Electromechanical Co., Ltd is equipped with Angle Meter, which can show Inclined angle
Previous : CE Certificate for Inclined Plane Device
