Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
News&Successful Cases
2015-12-22
Glow wire test for self ballasted LED lamps for general lighting services by voltage>50V
In the basis of IEC 62560 clause 12 , parts of insulating material retaining live part in position and external parts of insulating material providing protection against electric shock are subjected to the glow wire tester in accordance with IEC 60695-2-10, subject to following detail:
--The test specimen is a complete lamp, It may be necessary to take away parts of the lamp to perform the test , but care is taken to ensure that the test conditions are not significantly different from those occuring in normal use.
--The temperature of the tip of the glow wire is 650°C. After 30 s, the specimen is withdrawn from contact with the glow wire tip.
--Any flame or glowing of the specimen shall extinguish within 30 s of withdrawing the glowwire, and any flaming drop shall not ignite a piece of the tissue paper, spread out horizontally 200 ± 5 mm below the specimen.
Glow wire tester ZLT-GTR produced by Zhilitong Electromechanical Co., Ltd , conform to requirements of IEC 60695-2-10 standard.
Previous : The Tracking Test for plug and socket-outlet for household and similar purpose as per VDE standard
Next : The needle flame test for Audio, Video and similar electronic apparatus