Add : 1/F, No.2 Building, 287 Longxi Road, Liwan District, Guangzhou, Guangdong, China
- In 25 working days
- Ex-work , CNF , FOB
Horizontal Vertical Flame Tester
The ZLT Horizontal Vertical Flame Chamber Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behaviour specimens made from plastic and other non-metallic materials ,exposed to a flame ignition source of 50W nominal power.
These test methods determine the linear burning rate and the after flame/after glow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3,determined in accordance with ISO845.Then do not apply to materials that shrink away from the applied flame without ignition;ISO9773 should be used for thin flexible materials. And it's the combustion test device of plastic materials represented by UL 94. It can perform each test of HB, V0 to V2.
50W ( burning test for V-0, V-1, V-2 classification )
Internal diameter : Φ 9.5mm ± 0.3mm length: 100mm ±10mm
0", 20", 45"
Thermocouple Size O/D
Type K (Ni/Cr -Ni/Al )
Standard Copper Block
Φ 5.5mm ±0.01mm Weight : 1.76g ±0.01g before drilling Cu-ETP
Time for Temperature to increase
From 100°C ± 5°C to 700°C±3°C: 44s±2s (preset )
Overall Height of flame
18mm --22mm (adjustable )
Gas supply (do not provide )
Methane min. 98% purity
0 KPa to 7.5 KPa
220 V 50 Hz 3 A or 115 V 60 Hz optional
Conform to standards
UL94, IEC 60695-11-4 , IEC 60695-11-10
Digital Temperature Display
Include: 50W Flame Height Gauge And 100% Absorbent Cotton.
Previous: Burning Characteristics TesterRelated Products
ZLT-GTR, to determine the fire resistance by the f...
ZLT-GTR, accordance with IEC60695-2-10(2...
ZLT-ZY2, the instrument is designed to conform to ...
ZLT-LDQ1, determination of comparative tracking in...
ZLT-UL94, the combustion test device of plastic ma...
ZLT-HV4, applicable to the single wire and cable, ...
ZLT-BS1, conform to standard IEC60332-1-1,IEC60332...
ZLT-HW1, to measure the time required to ignite th...
ZLT-DQY, according to UL746A,UL1082
ZLT-ZL4, Clearance Gauge , conform to IEC 60695-11...
ZLT-HV500, conform to UL94, IEC60695-11-3, IE...
ZLT-SW1. To use for the insert-pull test of cordle...