Product Categories

Email: sales@electricaltest.com.cn, sales@electricaltest.cn Tel: +862081600059,18011959092 QQ : 2355822502, 2355822508

Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China

Products

Home >> Flammability Tester

Vehicle Interior Material Horizontal Flammability Tester for Fmvss571.302

Contact Now

Product Details

Vehicle Interior Material Horizontal Flammability Tester

Product details:Model ZLT-CH1P

Test to determine horizontal burning rate of certain category automobile interior material , according to GB8410, FMVSS571.302 and other standards.

Technical Parameters:

Bunsen burner	The inner diameter of the gas burner is 9.5mm.
Vertical combustion rate	Not greater than 100mm/min
Timing device	9999X0.1s
Sample holder	It consists of two U-shaped corrosion-resistant aluminum frames, with 6 pins of 4mm diameter for the lower plate and a heat-resistant metal supporting line of 0.25mm with a distance of 25mm for supporting plate.
Flame height	38 mm (with flame height gauge)
Control operation	Operate by PLC touch screen
Metal comb	The length is greater than 110mm with 7-8 smooth crests in every 25mm.
Clamp	U-shaped with thickness of 1.0mm±0.1mm. 12 round holes with a diameter of about 4mm are drilled from the left and right sides of the clamp.
Fuel gas	Propane, butane or methane (to be prepared by customers)
Steel plate size	Greater than 400mm±1mm
Chamber size	Inner size: 381203356mm
Test power	220V, 1KW
Test environment	Environmental conditions with temperature 10 ºC to 30 ºC and relative humidity 10%-80%.
Power supply	220V50Hz other voltages request.