Add : 1/F, No.2 Building, 287 Longxi Road, Liwan District, Guangzhou, Guangdong, China
- In 20 Working Days
- T/T , D/P
The thermocouple welder especially suitable for small wire k type thermocouples is made by extracting the carbon bar from a 6 volt carbon-zinc lantern battery then connecting the negative side of a large capacity, 6 volt sealed lead acid battery as shown. The positive side of the battery is then connected by alligator clip to within diameter 0.5 mm of the twisted thermocouple wires to be welded.
Power Supply 220V 50Hz or 115V 60HzShort Current 100A(Max)
Export Voltage 8.5Vac(Max)
Output Power 1：220V/0.2A/9W
Previous: Glow Wire Loop
Next: ThermocoupleRelated Products
ZLT-JH, Copper Block conform to IEC 60695
ZLT-BU1, conform to IEC 60695-11-3 Figure A1
conform to IEC60695-2-10, IEC60695-11-5
conform to IEC60695-2-10, IEC60695-11-5.
ZLT-GW, conform to IEC 60695-2-10 Figure 1
ZLT-ZL, Flame height gauge , conform to IEC 60695-...
ZLT-EL1, platinum electrode conform to IEC 60112 f...
ZLT-DSG2, to test the reliability of clamping devi...
ZLT-LWM1. To determine the torque strength of the ...
Model: ZLT-I19 For mechanical tests on antenna coa...
ZLT-LR. This load confirms to the IEC60335-2...