• 
  SGS Gulf Limited purchased IEC60335-1 Test Equipment 2021-11-27

  In November 2021, SGS Gulf Limited has ordered some test equipment according to IEC 60335-1 standard from us, including glow wire tester, stability test apparatus, test probes and test corner.    

• 
  The Requirements of Cord Anchorage Test Device 2016-06-27

  The Requirements of Cord Anchorage Test Device Based on IEC 60884-1 clause 23.2, The effectiveness of the retention of the cable by the cord anchorage is checked by the following test by means of Cord Anchorage Test Device.   The flexible cable is subjected for 1 min to a torque as specified intable 18, apply...

• 
  How to use test probe 13 2016-05-28

  How to use test probe 13 According to IEC 60335-1 Clause 8.1.3, appliances shall be constructed and enclosed so that there is adequate protection against accidental contact with live parts. Test probe 13 of IEC 61032 is applied without appreciable force through openings in class 0 appliances, class II applian...

• 
  Pull and Torque Test For Supply Cord Anchorage of Electric Appliance 2016-04-16

  Pull and Torque Test For Supply Cord Anchorage of Electric Appliance As per IEC 60335-1 clause 25.15, appliances provided with a supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall have a cord anchorage. The cord anchorage shall relieve conductors from st...

• 
  Antenna Coaxial Socket Testing for Audio, video and similar electronic apparatus 2016-04-12

  Antenna Coaxial Socket Testing for Audio, video and similar electronic apparatus According to IEC 60065 clause 12.5, antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ACCESSIBLE parts, shall be constructed so as to withstand such mechanic...

• 
  The torque test for devices forming a part of the MAINS plug 2016-03-05

  The torque test for devices forming a part of the MAINS plug According to IEC 60065 clasue 15.4, a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. Compliance is checked by engaging the device, as during intended use, with the socket-ou...

• 
  The Spring Impact Hammer’s Energy required by IEC 60065 Standard 2016-03-04

  The Spring Impact Hammer’s Energy required by IEC 60065 Standard Based on requirements of IEC 60065, audio, video and similar electronic apparatus shall have adequate mechanical strength and be so constructed as to withstand such handling as may be expected during intended use. The apparatus is held firmly against a ri...

• 
  The flame resistance for commercial refrigerator and freezer 2016-02-27

  The flame resistance for commercial refrigerator and freezer According to UL471 standard, for nonmetallic outer enclosure of commercial refrigerators and freezers, If the total unbroken surface area is 10 square feet (0.93 m2) or less, a material having a flammability rating of HB V-0, V-1, V-2, or 5V in accordance wit...

• 
  Needle flame testing for audio, video and similar electronic apparatus 2016-02-25

  Needle flame testing for audio, video and similar electronic apparatus In compliance with IEC 60065 Annex G , if no test specimens in accordance with IEC 60707, clause 4 are available, the following test methods may be applied: If flammability category V-0 according to IEC 60707 is required, in addition, the follo...

• 
  Pull Test for Plug ,Socket Outlet ,connectors of Electric Vehicles Provided with Flexible Cable 2016-02-20

  Pull Test for Plug ,Socket Outlet ,connectors of Electric Vehicles Provided with Flexible Cable   According to IEC 62196-1 clause 25.3, Non-rewireable plugs and vehicle connector accessories shall be provided with suitable flexible cable appropriate for the rating of the accessory.   Rewireable plugs and vehi...

Total 85 records First [1] 2 3 4 5 6 7 8 9 Next >> Last