Email: sales@electricaltest.com.cn, sales@electricaltest.cn
Tel: +862081600059,18011959092
QQ : 2355822502, 2355822508
Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
Products
75 and 20 Pounds Force Test Instrument
- China
- ZLT-F75P
- Guangzhou
- 1
- In 25 Working Days
- T/T , D/P
75 and 20 Pounds Force
Product details:
For resistance to crushing on direct plug-in units, according to UL1310-2005 clause 46.5.1.
One sample of the unit shall withstand for 1 minute a steady crushing force of 75 pounds-force (334 N) applied a right angle to the mounting surfaces. The enclosure is to be tested between two parallel, flat, hardwood blocks, each not less than 1/2 inch(12.7 mm) thick.
20 Pounds-force, model ZLT-F20P
For rod pressure on direct plug-in units, according UL1310-2005 clause 46.4.2.Weight 20 pounds, the axis of a 1/2 inch diameter metal rod, having a flat contact end with the edge rounded to a radius of 1/32 inch to eliminate sharp edges.
Previous: Test Chain
Next: Dielectric Strength Test Instrument
Related Products-
IEC 60529 IPX3 IPX4 Spray Nozzle
ZLT-JL1. For checking the protection against ingre... -
IEC 60529 IPX5 & IPX6 Water Jet Nozzle
ZLT-JL2. For checking the protection against... -
ZLT-P. To check the short-circuit protection,accor... -
ZLT-DB. For checking the protection against water ... -
IEC 60529 Oscillating Tubes Device
ZLT-DP. For checking the protection against water ... -
IEC 60529 Turntable Test Device
ZLT-TD. To carry the specimens when determining th... -
IEC 60529 IPX Water Test Whole System
ZLT-IPX1-6. For checking the protection agai... -
ZLT-CK. For gauging the creepage and clearan... -
ZLT-BM1. The Mandrel is used to test non-sep... -
Dielectric Strength Test Instrument
ZLT-KQ1. To test the surge strength according to I... -
ZLT-S1. according to IEC 60598 clause 9.2, to... -
According to IEC 62368:4.8.4.6, a flat surfac...
