Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
- In 25 Working Days
- T/T , D/P
Water Jet Nozzle
Product details: Model ZLT-JL2.
For checking the protection against ingress of water to prove the degrees of protection with the second characteristic numerals 5 “Protected against water jets” or 6 “Protected against powerful water jets”, in accordance with IEC60529 figure 6, IEC60335-1 clause 15.1.1, EN60950, IEC60598 figure 8.
Test Set consists of a jet handle that is equipped with a pressure meter. The interchangeable nozzles assemble easily to the jet handle. The nozzle element and tube within the handle of stainless steel.
Standard Outfit:1 nozzle element ,
1 handle, internal diameter 16 mm,
1 pressure gauge, almost independent of position,
1 flow control and stop valve with hand-wheel to adjust the water flow, with spout for hose of diameter 19 mm,
1 hose, diameter 19 mm, 3 m long, with 2 hose clamps.
Nozzle diameter: for degree of protection: measuring range Model
Of flow meter:
6.3 mm 5 12,5±0,625l/min ZLT-JL2.5
12.5 mm 6 100±5l/min ZLT-JL2.6
Previous: IEC 60529 Drip BoxRelated Products
ZLT-JL1. For checking the protection against ingre...
ZLT-P. To check the short-circuit protection,accor...
ZLT-DB. For checking the protection against water ...
ZLT-DP. For checking the protection against water ...
ZLT-TD. To carry the specimens when determining th...
ZLT-IPX1-6. For checking the protection agai...
ZLT-CK. For gauging the creepage and clearan...
ZLT-BM1. The Mandrel is used to test non-sep...
ZLT-KQ1. To test the surge strength according to I...
ZLT-F75P. For resistance to crushing on dire...
ZLT-S1. according to IEC 60598 clause 9.2, to...
According to IEC 62368:22.214.171.124, a flat surfac...