Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
- In 25 Working Days
- T/T , D/P
Abnormal Heat of Insulating Sleeves of Plug Pins Test Apparatus
Produce details: Model ZLT-AH1
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884 1 figure 40,
This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet,
5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet,
1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position
Power supply : 220V 50Hz or 110V60Hz, other voltages on request.
Previous: Shrouds Pressure Test ApparatusRelated Products
ZLT-CS1, to test plugs and socket-outlets, cable c...
ZLT-LJ2, for measuring and testing the torque stra...
ZLT-DW2, for continuous bending tests by swivellin...
ZLT-HZ1, installed into the test machine ZLT-DW2, ...
ZLT-LJ3, this device is for testing the resistance...
ZLT-QY1, to determine the dimensional stability of...
ZLT-GT1, is to determine the mechanical strength o...
ZLT-DY1, for testing cable connections with interm...
ZLT-RS1, to determine the verification of resistan...
ZLT-CX1, to determine the fixation of pins in the ...
ZLT-CB1, for verification of the maximum and minim...
ZLT-HP1, for pressure tests on plug pin insulating...