Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
ZLT-CB1, for verification of the maximum and minimum withdrawal force of the socket and plug, according to IEC60884 1 figure 18 and 19, VDE0620-2005 bild 19.
ZLT-HP1, for pressure tests on plug pin insulating sleeves at temperatures to 200℃ with 2,5N loads, according to IEC60884-1 figure 41,BS1363 figure 10.
ZLT-MS, to determine the mechanical strength test on multiple portable socket outlets, in according to IEC60884 1 figure 29,
ZLT-WD1. Table Diameter :600mm ,to determine the stability of electric appliances ,in accordance with IEC60065 clause 19.1, IEC60335-1 clause 20.1, IEC60601-1 clause 24.1, IEC 60950 clause 4.1.1
ZLT-SDW1. To determine the mechanical strength of sealed lighting chains, in accordance with the IEC60598-2-20 Fig 3 and clause 20.6.14.
ZLT-DTC. To check the security of lampholder contacts, and conform to the IEC60598-2-20 Fig 2 and clause 20.11.3.
Total 142 records First << Previous 1 2 3 [4] 5 6 7 8 9 10 Next >> Last