Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
Products
Appliance Stability Tester
Product details: Model ZLT-WD2
Table Diameter : 800mm Manual Control
ZLT-WD2D : Electric Model
Standard Outfit:
1 table board, with supporting frame,1 base plate with hinges for the supporting frame and for the spindle bearing,
1 threaded spindle with handwheel for adjusting the incline of the table board from the horizontal up to 30°against the horizontal,
1 inclination angle measuring instrument, to mount at the table board, for checking the angle of inclination of the table board,
Model
ZLT-WD1
ZLT-WD2
ZLT-WD2D
ZLT-WD3
ZLT-WD3D
Table Diameter
600mm
800mm
800mm
1000mm
1000mm
Rotation Mode
Manual control
Manual Control
Electric Model
Manual Control
Electric Model
Rotation Speed
1 rpm
1 rpm
Inclination Angle
0-30±1°
0-30±1°
0-30±1°
0-30±1°
0-30±1°
Permissible Load
Less than 50 kgs
less than 80 kgs
less than 80 kgs
less than 120 kgs
less than 120 kgs

Previous: IEC60312 figure 16 Tumbling Barrel Safety Test Equipment
Next: Appliance Stability Test Equipment
Related Products-
ZLT-GC1, to determine the adherence and the durabi...
-
ZLT-IF1. To determine the mechanical strength of e...
-
ZLT-VL120. This Test Vessel confirms to the IEC 60...
-
ZLT-WD1. Table Diameter :600mm ,to determine the s...
-
Flexible Pipe Winding Test Device
ZLT-SDW1. To determine the mechanical strength of ... -
Lampholder Contacts Security Test Device
ZLT-DTC. To check the security of lampholder conta... -
Toaster Switch Endurance Test Machine
ZLT-DSK. To determine on off life of switch of the... -
Cordless Kettle Insert Pull Tester
ZLT-SW1. To use for the insert-pull test of cordle... -
ZLT-LWM1. To determine the torque strength of the ...
-
Automatic Cord Reels Endurance Tester
ZLT-JX1. To determine endurance of automatic cord ... -
Microwave Oven Door Endurance Tester
ZLT-WM1T. To determine the endurance of the door s... -
Load for Testing Rotating Spits
ZLT-LR. This load confirms to the IEC60335-2...