Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
ZLT-HW1, to measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20. To measure the time...
ZLT-JDW3R. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 -1. 3 Working S...
ZLT-JDW1R. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 1.
ZLT-DW2, for continuous bending tests by swivelling movements to check 6 cables simultaneously, in accordance with IEC60884-1 figure 21 and VDE0620 figure 21.
ZLT-HZ1, installed into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage.
ZLT-DCJ2, To determine the mechanical strength of insulated cords, cables, couplers, insulating sleeves and enclosures in the cold, according to IEC60811-1-4 figure 2, IEC60811-506:2012 figure 1,IEC 6...
Total 146 records First << Previous 1 2 [3] 4 5 6 7 8 9 10 Next >> Last