Email: sales@electricaltest.com.cn, sales@electricaltest.cn
Tel: +862081600059,18011959092
QQ : 2355822502, 2355822508
Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
Products
Tumbling Barrel for Testing the Mechanical Strength of Pads
Product details:Model:ZLT-GT5
for testing the mechanical strength of pads,according to IEC60335-2-17 figure 107 and clause 21.107.
Inner height: 1975mm.
Fall height:1 800mm.
Chute length:600mm.
Bottom Impact Surface: 3mm steel and hard wooden plate.
Rotation speed:6 r/min to 7 r/min
Power Supply: A.C.220V50Hz, other voltages or frequencies on request.
Previous: Low Carbon Steel Vessel
Next: Scratch Pin Probe
Related Products-
ZLT-GC1, to determine the adherence and the durabi... -
ZLT-IF1. To determine the mechanical strength of e... -
ZLT-VL120. This Test Vessel confirms to the IEC 60... -
ZLT-WD1. Table Diameter :600mm ,to determine the s... -
Flexible Pipe Winding Test Device
ZLT-SDW1. To determine the mechanical strength of ... -
Lampholder Contacts Security Test Device
ZLT-DTC. To check the security of lampholder conta... -
Toaster Switch Endurance Test Machine
ZLT-DSK. To determine on off life of switch of the... -
Cordless Kettle Insert Pull Tester
ZLT-SW1. To use for the insert-pull test of cordle... -
ZLT-LWM1. To determine the torque strength of the ... -
Automatic Cord Reels Endurance Tester
ZLT-JX1. To determine endurance of automatic cord ... -
Microwave Oven Door Endurance Tester
ZLT-WM1T. To determine the endurance of the door s... -
Load for Testing Rotating Spits
ZLT-LR. This load confirms to the IEC60335-2...
