Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
Products
Vertical Hammer Test Device
Product details:Model ZLT-SZ1.
Conforms to IEC60068-2-75 Test Ehc.
The hammer consists basically of a striking element which falls freely from rest through a vertical height, selected from following table, on to the specimen surface held in a horizontal plane. The fall of the striking element shall be along a guideway, for example a tube, with negligible braking. This guideway shall not rest on the specimen and the striking element shall be free of the guideway on striking the specimen.
Table-Height of fallEnergy
J 0.2 0.35 0.5 0.7 1 2 5 10 20 50
Equivalent
Mass
kg 0.25 0.25 0.25 0.25 0.25 0.5 1.7 5 5 10
Height of fall
mm±1% 80 140 200 280 400 400 300 200 400 500
The height of fall shall be as giver in above table, the equivalent mass stated therein being equal to the actual mass of the striking element.
Standard Outfit:
1 height scale of fall,1 equivalent mass striking element.
Previous: Pendulum Impact Test Apparatus
Next: Spring Hammer Calibration Device
Related Products-
ZLT-CJ1, Single Model ,test the mechanical integri... -
Vitreous and Porcelain Enamels Pistol Im...
ZLT-CJ6, It is for vitreous and porcelain enamels ... -
Pendulum Impact Test Apparatus
ZLT-BC3, To test the mechanical strength with... -
Spring Hammer Calibration Device
ZLT-CD, for testing and calibrating spring operate... -
Pendulum Impact Test Apparatus
ZLT-BC1, To test the mechanical strength with impa... -
Steel Ball Dropping Test Device
For testing the mechanical strength and the impact... -
ZLT-SE, conform to IEC60068-2-75 table 1 and table... -
Calibration Device Adjustment Arrangemen...
For testing and gauging the scale of spring hammer... -
ZLT-GQ, To determine the mechanical strength ... -
-
Calibration Device for Spring Hammer
ZLT-CD2, For testing and calibrating spring-operat... -
5J Spring Impact Hammer Lab Tester
ZLT-CJ5, Impact Energy 5J ,test the mechanical int...
