Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
ZLT-QL1. This Tester is checking mechanical strength of completed flexible cables,according to IEC60245-2/1998-04 figure 1, IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11.
ZLT-HW1, to measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20. To measure the time...
ZLT-JDW2R. To determine the bendability of the tinsel cord,in accordance with IEC 60227-2 clause 3.2 ,figure 2 and IEC 60227-1 clause 5.6.3.2.
ZLT-JDW1R. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 1.
ZLT-SDJ1. To determine the bending stability at low temperature of insulated cords and cables up to 12,5mm diameter in cold test chambers or freezers with mandrels to 50mm diameter, according to IEC60...
ZLT-JR1. To determine the deformation which wire in a high temperature and load, in accordance with UL1581 560 test, and figure 560.1.
Total 106 records First << Previous 1 2 3 [4] 5 6 7 8 9 10 Next >> Last