Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
- In 25 working days
- T/T , D/P
High Current ARC Ignition Tester
Product details:Model ZLT-DQY
To check a fire enclosure of the material that is located less than 13 mm through air from arcing parts such as unenclosed commutators and unenclosed switch contacts,according to UL746A,UL1082.
1 circuit for high current arcing test,the current is 33 A at a power factor of 0,5,
1 stationary electrode consists of a 3,5 mm diameter solid copper conductor having a 302 chisel point,
1 movable electrode consists of 3 mm diameter stainless steel rod with a symmetrical conical point having a total angle of 602 and is capable of being moved along its own axis,
1 motor with a separation speed of 254 mm/s±25 mm/s, to produce a series of arcs at a rate of approximately 40 arcs/min,
1 set 6 digit counter to records the arcs.
Power supply:380V50Hz,other voltages.
Previous: Insulating Tape Flame Tester
Next: Clearance GaugeRelated Products
ZLT-GTR, to determine the fire resistance by the f...
ZLT-GTR, accordance with IEC60695-2-10(2...
ZLT-ZY2, the instrument is designed to conform to ...
ZLT-LDQ1, determination of comparative tracking in...
ZLT-UL94, the combustion test device of plastic ma...
ZLT-HV50, conform to UL94, IEC60695-11-4, IEC...
ZLT-HV4, applicable to the single wire and cable, ...
ZLT-BS1, conform to standard IEC60332-1-1,IEC60332...
ZLT-HW1, to measure the time required to ignite th...
ZLT-ZL4, Clearance Gauge , conform to IEC 60695-11...
ZLT-HV500, conform to UL94, IEC60695-11-3, IE...
This apparatus is for testing the resistance...