Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
- In 25 Working Days
- T/T , D/P
Power Cord Flexibility Tester
Product details: Model ZLT-JDW3R.
For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745 -1.
The part of the appliance that includes the inlet opening is fixed to the oscillating member so that, when the supply cord is at the middle of its travel, the axis of the cord where it enters the cord guard or inlet is vertical and passes through the axis of oscillation. The major axis of the section of flat cords shall be parallel to the axis of oscillation.
The cord is loaded so that the force applied is– 10 N, for cords having a nominal cross-sectional area exceeding 0,75 mm2;
– 5 N, for other cords.
The oscillating member is moved through an angle of 90° (45° on either side of the vertical), the number of flexing for type Z attachments being 20 000 and for other attachments 10 000. The rate of flexing is 60 per minute.
3 Working Station
1 electric drive motor with reduction and swiveling gear,1 output shaft, swiveling angle 45°,60°or 90°on either side of the vertical,
3 sets of weights, 5N-10N,
1 speed adjustment, for swiveling frequency 10~60 rpm,
3 control unit with 6 digit predetermining counter to switch off the drive, and records the number of swiveling when the sample open circuit,
3 control circuit of 3 KVA power output, power supply to specimen,
Power Supply: A.C.220V 50Hz, other voltages and frequencies on request.
Previous: Abrasion Resistance Testing Machine
Next: Swivel Test MachineRelated Products
Internal Wire Flexibility TesterZLT-WM1A, in accordance with IEC60335-1 clause 23....
Flexible Cables Flexing Tester ZLT-QL1ZLT-QL1. This Tester is checking mechanical streng...
ZLT-JDW1. For continuous bending tests by swivelin...
Abrasion Resistance Testing MachineZLT-DYJ2. To determine the durability of cable cov...
Tinsel Cord Bending Test ApparatusZLT-JDW2R. To determine the bendability of the tin...
Power Cord Strain and Twist TesterZLT-LN1. To determine the strain and twisting of t...
ZLT-JDW1R. For continuous bending tests by swiveli...
ZLT-SDJ1. To determine the bending stability at lo...
Thermal Deformation Test DeviceZLT-JR1. To determine the deformation which wire i...
Tinsel Cord Snatch Test DeviceZLT-ST2, to determine the impactive effect of...
Three Pulley And Two Pulley Cable Flexin...ZLT-QL1A. adding three pulley flexing t...
Flexible Cord Abrupt Pull Test ApparatusConform to UL 817 clause 99 and figure 99.1 -99.2,...