Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
- In 25 Working Days
- T/T , D/P
Tinsel Cord Snatch Test Device
Product details: Model ZLT-ST2
To determine the impactive effect of the tinsel cord,in accordance with IEC 60227-2 clause 3.3 and IEC 60227-1 clause 184.108.40.206.
A sample of cord of appropriate length shall be attached by one to a rigid support and a weight having a mass of 0.5 kg shall be secured to the sample 0.5 m below the point of attachment. A current of about 0.1 A shall be passed through the conductors. The weight shall be raised to the point of attachment and then dropped, five times.
1 weight, 0.5 kg,
1 output current, approximately 0,1 A, Power Supply: A.C.220V 50Hz, other voltages and frequencies on request.
Previous: Three Pulley And Two Pulley Cable Flexing Testing Machine
Next: Thermal Deformation Test DeviceRelated Products
Internal Wire Flexibility TesterZLT-WM1A, in accordance with IEC60335-1 clause 23....
Flexible Cables Flexing Tester ZLT-QL1ZLT-QL1. This Tester is checking mechanical streng...
ZLT-JDW1. For continuous bending tests by swivelin...
Abrasion Resistance Testing MachineZLT-DYJ2. To determine the durability of cable cov...
ZLT-JDW3R. For continuous bending tests by swiveli...
Tinsel Cord Bending Test ApparatusZLT-JDW2R. To determine the bendability of the tin...
Power Cord Strain and Twist TesterZLT-LN1. To determine the strain and twisting of t...
ZLT-JDW1R. For continuous bending tests by swiveli...
ZLT-SDJ1. To determine the bending stability at lo...
Thermal Deformation Test DeviceZLT-JR1. To determine the deformation which wire i...
Three Pulley And Two Pulley Cable Flexin...ZLT-QL1A. adding three pulley flexing t...
Flexible Cord Abrupt Pull Test ApparatusConform to UL 817 clause 99 and figure 99.1 -99.2,...