Add : 3-7, 1 Floor, Block C, No.23 Panlong Industrial Zone, Longxi Road, Guangzhou, China
- In 25 Working Days
- Ex-work, FOB, CIF
Lift Cables Flexing Tester
To determine the mechanical strength of lift cables,according to IEC60227-6 clause 4.4.1 and figure 3.
Carriages mounted at the same height and move horizontally toward and away from each other in simple harmonic motion
Test times: Setting available
DC 12V supply to test voltage circuit for cable.
Distance between cable clamp: Maximum 1700±10mm, Minimum 760±10mm
Speed adjustable, available to uniform velocity or maximum acceleration of 4m/s2 and the test speed of 1500 complete cycles per hour, the distance of travel for each movement(up or down) shall be 650 mm.
Operated by PLC controlling system.
Work station: 2 specimen testing
Power supply:A.C.220V 50Hz,other voltages and frequencies on request.
ZLT-WM1A, in accordance with IEC60335-1 clause 23....
ZLT-QL1. This Tester is checking mechanical streng...
ZLT-JDW1. For continuous bending tests by swivelin...
ZLT-DYJ2. To determine the durability of cable cov...
ZLT-JDW3R. For continuous bending tests by swiveli...
ZLT-JDW2R. To determine the bendability of the tin...
ZLT-LN1. To determine the strain and twisting of t...
ZLT-JDW1R. For continuous bending tests by swiveli...
ZLT-SDJ1. To determine the bending stability at lo...
ZLT-JR1. To determine the deformation which wire i...
ZLT-ST2, to determine the impactive effect of...
ZLT-QL1A. adding three pulley flexing t...